#color_Aerolite REACTIV 1-3 Light Amplifier Lens - Yellow/Multilayer Red
#color_Aerolite Lens REACTIV 1-3 Light Amplifier Yellow/Multilayer Red
#color_Aerolite Lens Spectron 3 Brown/Multilayer Orange
#color_Aerolite Nose Pads Pink
#color_Aerolite Lens Spectron 3 Smoke/Silver Flash
#color_Aerolite Lens REACTIV 1-3 High Contrast Red/Multilayer Blue
#color_Aerolite Lens REACTIV 1-3 Yellow/Gold Flash
#color_Aerolite Lens REACTIV 0-3 High Contrast Clear/Smoke
#color_Aerolite Nose Pads Blue
#color_Aerolite Nose Pads Gray
#color_Aerolite Nose Pads Green
#color_Aerolite Temples Black/Red
#color_Aerolite Temples White/Blue
#color_Aerolite Temples Dark Blue/Blue
#color_Aerolite Temples Translucent Black/Blue
#color_Aerolite Temples Orange/Black
#color_Aerolite Temples Tortoise/Blue

Aerolite Sunglasses Parts

$170.00
SKU: 496 Zebra Light Fire - J4963314
Color:Aerolite REACTIV 1-3 Light Amplifier Lens - Yellow/Multilayer Red
Julbo brand benefit icons

Parts for Aerolite sunglasses  Side Shields and Temple Arms are sold per pair.  Installation hardware is included.

 

Lens

 

These lenses are a little tricky, but this should help:

  1. Remove the nose bridge. Pop that off from the bottom first, then the top will release. 
  2. The temple arms pop off by pulling up and away from the lower attachment, in an upward motion. So hold on to the lens securely, and with the other hand pull up and away where the frame inserts into the lens, first releasing the lower part from the slot and then whole thing should release. 
  3. Now with the new lens, work in reverse. Pop the lower part of the frame into the slot, and then make sure the top part seats securely. It should pop into place. Same thing with the nose bridge; set the top on first and then push it into the bottom, popping it into place. 
  4. Do a little flex test to make sure everything is secure, and you're good to go.